[1] VIJAPUR S H. Design optimization and experimental study of a wet laminar electrostatic precipitator for enhancing collection efficiency of aerosols[D]. Ohio:Ohio University, 2008.
[2] NOUI-MEHIDI M N, WU J, ŠUTALO I D, et al. Velocity distribution downstream of an asymmetric wide-angle diffuser[J]. Experimental Thermal and Fluid Science, 2005, 29(6):649-657.
[3] CHOI M K, LIM Y B, LEE H W, et al. Flow uniformizing distribution panel design based on a non-uniform porosity distribution[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2014, 130:41-47.
[4] BARRATT D, KIM T. A banked wide-angle diffuser with application to electrostatic precipitators[J]. Proceedings of the Institution of Mechanical Engineers, Part A:Journal of Power and Energy, 2014, 229(1):88-98.
[5] 熊桂龙, 李水清, 陈晟, 等. 增强 PM_2.5脱除的新型电除尘技术的发展[J]. 中国电机工程学报, 2015, 35(9):2217-2223. XIONG Guilong, LI Shuiqing, CHEN Sheng, et al. Development of advanced electrostatic precipitation technologies for reducing PM_2.5 emissions from coal-fired power plants[J]. Proceedings of the CSEE, 2015, 35(9):2217-2223.
[6] SAHIN B, WARD-SMITH A J. The use of perforated plates to control the flow emerging from a wide-angle diffuser, with application to electrostatic precipitator design[J]. International Journal of Heat and Fluid Flow, 1987, 8(2):124-131.
[7] SAHIN B, WARD-SMITH A J. The pressure distribution in and flow characteristics of wide-angle diffusers using perforated plates for flow control with application to electrostatic precipitators[J]. International Journal of Mechanical Sciences, 1993, 35(2):117-127.
[8] ŞAHIN B, WARD-SMITH A J, LANE D. The pressure drop and flow characteristics of wide-angle screened diffusers of large area ratio[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1995, 58(1/2):33-50.
[9] ZHAO Tianyi, ZHANG Jili, MA Liangdong. A general structural design methodology for multi-hole orifices and its experimental application[J]. Journal of Mechanical Science and Technology, 2011, 25(9):2237-2246.
[10] HOLT G J, MAYNES D, BLOTTER J. Cavitation at sharp edge multi-hole baffle plates[C]//ASME 2011 International Mechanical Engineering Congress and Exposition. Denver, Colorado, USA:American Society of Mechanical Engineers, 2011:401-410.
[11] ÖZAHI E. An analysis on the pressure loss through perforated plates at moderate Reynolds numbers in turbulent flow regime[J]. Flow Measurement and Instrumentation, 2015, 43:6-13.
[12] 刘明, 孟桂祥, 严俊杰, 等. 火电厂除尘器前烟道流场性能诊断与优化[J]. 中国电机工程学报, 2013, 33(11):1-6. LIU Ming, MENG Guixiang, YAN Junjie, et al. Flow characteristics diagnosis and optimization for dust collectors inflow duct in thermal power plants[J]. Proceedings of the CSEE, 2013, 33(11):1-6.
[13] 孙超凡, 龙新峰, 于兴鲁, 等. 大型电袋复合除尘器均流布置的数值模拟与研究[J]. 中国电力, 2013, 46(10):140-145. SUN Chaofan, LONG Xinfeng, YU Xinglu, et al. Numerical simulation of airflow deflector in large electrostatic fabric precipitators[J]. Electric Power, 2013, 46(10):140-145.
[14] 胡满银, 雷应奇. 燃煤电厂袋式除尘器[M]. 北京:中国电力出版社, 2010.
[15] 李小海, 翁骥, 王铮, 等. 布袋除尘器喇叭口内气流均布板数值模拟[J]. 能源与节能, 2016(11):169-170. LI Xiaohai, WENG Ji, WANG Zheng, et al. Numerical simulation of intake uniform board in the horn mouth of bag filter[J]. Energy and Conservation, 2016(11):169-170.
[16] 杨小海. 电改电袋复合除尘器的设计与模拟[D]. 北京:华北电力大学, 2013.
[17] 李贞, 曹辰雨, 任建兴, 等. 袋式除尘器的除尘特性分析[J]. 上海电力学院学报, 2013, 29(4):379-382. LI Zhen, CAO Chenyu, REN Jianxing, et al. Analysis of the characteristics of bag filter in power plants[J]. Journal of Shanghai University of Electric Power, 2013, 29(4):379-382.
[18] WARD-SMITH A J, LANE D L, REYNOLDS A J, et al. Flow regimes in wide-angle screened diffusers[J]. International Journal of Mechanical Sciences, 1991, 33(1):41-54.
[19] MOHR M, YLÄTALO S, KLIPPEL N, et al. Submicron fly ash penetration through electrostatic precipitators at two coal power plants[J]. Aerosol Science and Technology, 1996, 24(3):191-204.